Features: - 8.4 inch super resolution color TFT display
- Maximum 9 waveforms
- Use built-in system, high integrated intelligent module technology, full digital monitoring, super functions, lowest * swearing and low failure rate
- Combined functions of maternal monitor and fetal monitor
- Measure the intrapartum patient and fetal heart rate
- Uterine contraction and fetal movement marker
- Continuous real time recording of fetal heart rate
- Can be switched to normal patient monitoring interface
- 72 hours graphic trends and tabular of all parameters
- 1440 groups of NIBP data storage
- ST analysis
- Anti-high frequency electronic surgical unit and anti-defibrillation, for monitoring in the surgery or for cardiac care
- Use wide-angle, multi-wafer, wide beam and ultrasonic probes
Standard configuration: - FHR, Uterine Contraction Pressure(TOCO), FM and Maternal ECG, NIBP, SPO2, PULSE, Built-in rechargeable battery, thermal printer
Optional: Technical Specifications: Safety | IEC60601 approved (GB9706) | Power source | AC100V-240V, 50/60Hz | Size | 330mm(L) × 275mm(W) × 160mm(H) | Net weight | 5.0 kg | Working | Temperature: 5 ~ 40℃
Humidity <= 85% | Transportation and Storage | Temperature: -20 ~ 55℃
Humidity <= 85% |
Ultrasonic Probe: (Fetal Heart Rate) Type | Type B proof, dirctional, using pulse doppler system | Working frequency | 2.5 MHz | Transmitting power density | 1.2m W/cm2 | Probe | Multi-wafer probe | Sample rate | 5 ms | Calculating precision of FHR | 0.25 bpm | Accuracy of FHR | 1 bpm (100-180 bpm) |
Marker (Fetal Movement) Manually push button mode | When pressed, a red strip will be displayed above the FHR graph | Uterine Contraction Pressure | Type B proof | Uterine contraction pressure probe | Manual zero adjustment | Design pressure sensitivity: 0-100% |
ECG Lead | 5 leads (R, L, F, N, C) | Lead selection | I, II, III, avR, avL, avF, V | Waveform | 7 channels | Gain selection | ×0. 5, ×1, ×2 | HR and alarm range | Adult: 15-300bpm
Neonate/pediatrics: 15-350bpm | Accuracy | ±2% or ±2bpm, whichever is greater | Input impedance | > 5ΜΩ | Voltage range of electrode polarization | ±300mV | Leakage current | < 30uA | Filter | Diagnostic mode: 0.05 ~ 100Hz
Monitoring mode: 0.5 ~ 35Hz
Surgical mode: 1 ~ 25Hz | Scaling signal | 1mV ± 3% | Measurement range | -1.0mV ~ +1.0mV | Alarm Range | -0.80mV~0.80mV |
RESP Model | RA-LL impedance | Measurement range | Adult: 0 ~ 120bpm
Neonate/pediatrics: 1 ~ 150bpm | Resolution | 1rpm | Accuracy | ±2rpm |
NIBP Method | Automatic oscillometric | Operation mode | Auto/Manual | Alarm Type | Systolic, Diastolic, Mean | Measurement ranges | Systolic BP: 40 ~ 300mmHg
Diastolic BP: 10 ~ 220mmHg
Mean BP: 20 ~ 240mmHg | Resolution | 1mmHg | Accuracy | Max average error ±5mmHg or ±5%, whichever is greater | Overload Protection | Double safety protection |
SPO2 Measurement Range | 0 ~ 100% | Alarm range | 0 ~ 100% | Resolution | 1% | Accuracy | ±2% (80~100%)
±3% (60~79%) |
PULSE RATE Range | 0 ~ 254bpm | Resolution | 1bpm | Accuracy | ±1bpm or ±2%, whichever is greater | Alarm delay time | 10sec |
TEMP Channel | 2 channels | Measurement range | 0~50℃ | Alarm range | 0~45℃ | Resolution | 0.1℃ | Accuracy | ±0.2℃ |
|
|
